Trains

Post Reply
David
Site Admin
Posts: 3016
Joined: Mon April 30, 2007, 8:13 am
Location: Hamlet, NC
Contact:

Trains

Post by David »

How many trains came through Hamlet a day in 1936?
Bruce Osburn
Posts: 341
Joined: Tue May 1, 2007, 11:05 pm
Location: Brunswick, Ga.
Contact:

Re: Trains

Post by Bruce Osburn »

36?
Bruce Osburn
--We live so long as we are remembered... old German adage.
sigmore
Posts: 718
Joined: Thu February 7, 2008, 6:46 pm
Location: Titusville, Florida
Contact:

Re: Trains

Post by sigmore »

Is this a trick question? I remember one day back in 36 that the whole east coast froze over and only one train came through and he just wanted his bearings greased. I think it was in November.
David
Site Admin
Posts: 3016
Joined: Mon April 30, 2007, 8:13 am
Location: Hamlet, NC
Contact:

Re: Trains

Post by David »

Aug 13, 1936 Hamlet News Messenger says 32.
Aug 13, 1936.jpg
Aug 13, 1936.jpg (38.01 KiB) Viewed 17198 times
freddie hassler
Posts: 777
Joined: Thu May 3, 2007, 3:05 am
Location: Hamlet,N.C.
Contact:

Re: Trains

Post by freddie hassler »

And there were 2 that ran south of Hamlet about 2 miles The Rockingham Railroad
it came across the SAL MAIN Line. then across Freeman Mill Rd, Gin Mill Rd. on by Central Carolina Gas Co. then ran beside SAL tracks on 381 to Gibson and other points south
Bruce Osburn
Posts: 341
Joined: Tue May 1, 2007, 11:05 pm
Location: Brunswick, Ga.
Contact:

Re: Trains

Post by Bruce Osburn »

The Hamlet News Messenger's subheadline is grossly misleading... it's like counting chickens twice. "16 in and 16 out" still adds up to 16 because I doubt all passengers debarked in Hamlet and a completely new passenger train formed with different passengers. And the Rockingham and Bennettsville Railroad can't be included in that count because I don't recall ever seeing any passenger cars on that line.. only freight cars (and very few at that).
Bruce Osburn
--We live so long as we are remembered... old German adage.
freddie hassler
Posts: 777
Joined: Thu May 3, 2007, 3:05 am
Location: Hamlet,N.C.
Contact:

Re: Trains

Post by freddie hassler »

[The Rockingham RR did saw them many times when we lived on School St in E. Rockingham they came right by our house, but they didn't stop in Hamlet just passed by 2 miles south
TR4

Re: Trains

Post by TR4 »

OK
Last edited by TR4 on Sat October 11, 2014, 5:14 pm, edited 1 time in total.
sigmore
Posts: 718
Joined: Thu February 7, 2008, 6:46 pm
Location: Titusville, Florida
Contact:

Re: Trains

Post by sigmore »

I used to squirt grease in the bearing cups at the hump yard while my dad ate his supper. May not have been the hump yard though because sometimes I would have to wait for the train to slow to be able to hit every cup with the grease wand.
Wayne Fuller
Posts: 339
Joined: Mon April 30, 2007, 11:39 pm
Location: Hamlet, N.C.
Contact:

Re: Trains

Post by Wayne Fuller »

The cars were greased just before going over the hump. There was 2 pits, one on each side of the track. The pits were done away with shortly after a car knocker (car inspector) David Billingsley was killed when cars were derailed and fell into the pit.
sigmore
Posts: 718
Joined: Thu February 7, 2008, 6:46 pm
Location: Titusville, Florida
Contact:

Re: Trains

Post by sigmore »

I remember that. Shook my dad up pretty good!
Jody Meacham
Posts: 572
Joined: Mon April 30, 2007, 6:11 pm
Location: San Jose, Calif.
Contact:

Re: Trains

Post by Jody Meacham »

That's a sad story. I remember those pits from working on the yard.

The necessity for the pits was eliminated by the change from journal bearings on freight car axles, which required replenishment of the oil and rags that lubricated the bearing, to roller bearings that are almost universal today. Most railroad passenger cars began getting roller bearings in the 1930s, but the switch for freight cars was just getting under way in the late 1960s and early '70s.
Jody Meacham
HHS Class of 1969
freddie hassler
Posts: 777
Joined: Thu May 3, 2007, 3:05 am
Location: Hamlet,N.C.
Contact:

Re: Trains

Post by freddie hassler »

Wayne, I remember when David got killed ,I'm thinking his brother BT was working Yard B at the time and helping shove out the Double Over to be rehumped while the Hump Engines were pulling on the North End
Bruce Osburn
Posts: 341
Joined: Tue May 1, 2007, 11:05 pm
Location: Brunswick, Ga.
Contact:

Re: Trains

Post by Bruce Osburn »

Re freddie hassler's post of today: I understood just the first phrase, which was clear enough, but the rest of the post completely befuddled me. Is that a variation of the once super-secret Navajo code talker's vocabulary? Does Double Over to be rehumped mean what happens when someone drops the soap in a shower room?
Bruce Osburn
--We live so long as we are remembered... old German adage.
Jody Meacham
Posts: 572
Joined: Mon April 30, 2007, 6:11 pm
Location: San Jose, Calif.
Contact:

Re: Trains

Post by Jody Meacham »

Sometimes finding yourself in the middle of a railroad conversation is like waking up and discovering you're in the middle of France.
Jody Meacham
HHS Class of 1969
sigmore
Posts: 718
Joined: Thu February 7, 2008, 6:46 pm
Location: Titusville, Florida
Contact:

Re: Trains

Post by sigmore »

Thanks loads Bruce! Blew beer out of my nose reading that.
lynnsteen
Posts: 325
Joined: Thu May 10, 2007, 1:57 am
Location: Lindale, TX
Contact:

Re: Trains

Post by lynnsteen »

That was a double good response Bruce.
_______________
Lynn Steen
HHS Class of '60
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests